No code yet and no test device. The README maps LANCOM's four operating systems (LCOS, LCOS SX, LCOS LX, LCOS FX) to planned entry points and napalm-device-types role bases. docs/lcos-sx3.md covers the first target (GS-23xx on LCOS SX 3.34): CLI model, getter-to-command map from the GS-2300 CLI reference, and the open get_config question (TFTP-only export). docs/fixtures.md lists the output to record from a real device. Refs NetOrk/netork#1094
53 lines
1.9 KiB
Markdown
53 lines
1.9 KiB
Markdown
# Fixtures to capture
|
|
|
|
Record raw output from a real device the first time one is connected. Store it under
|
|
`tests/fixtures/<model>-<firmware>/` (e.g. `gs-2310p-plus-3.34/`), one file per command,
|
|
plus a `COMMANDS.txt` that lists the command, the section it ran in, and the device state
|
|
that matters (links up/down, PoE consumers, LLDP neighbours present or not).
|
|
|
|
Scrub before committing: serial numbers, public IPs, SNMP communities, hostnames that
|
|
identify a site.
|
|
|
|
## LCOS SX 3 (GS-23xx)
|
|
|
|
Session basics:
|
|
|
|
- [ ] login banner and the first prompt after SSH login
|
|
- [ ] `?` at the top level (list of sections)
|
|
- [ ] `?` inside each section listed below
|
|
- [ ] the error text of an invalid command and of an invalid parameter
|
|
|
|
Per section:
|
|
|
|
- [ ] `system` → `show`
|
|
- [ ] `firmware` → `show`
|
|
- [ ] `port` → `show configuration`
|
|
- [ ] `port` → `show status` (with at least one link up and one down)
|
|
- [ ] `port` → `show simple-counter`
|
|
- [ ] `port` → `show detail-counter 1`
|
|
- [ ] `port` → `show sfp <sfp-port>` (with and without a module)
|
|
- [ ] `ip` → `show`
|
|
- [ ] `ipv6` → `show current`
|
|
- [ ] `fdb` → `show mac-table`
|
|
- [ ] `fdb` → `show static-mac`
|
|
- [ ] `lldp` → `show config`
|
|
- [ ] `lldp` → `show info <port-list>` (with a neighbour, e.g. another switch or a router)
|
|
- [ ] `vlan` → `show vlan`
|
|
- [ ] `vlan` → `show port-config`
|
|
- [ ] `vlan` → `show port-status static`
|
|
- [ ] `thermal` → `show`
|
|
- [ ] `snmp` → `show snmp`
|
|
- [ ] `snmp` → `show community`
|
|
- [ ] `time` → `show ntp`
|
|
- [ ] `poe` → `show config` (PoE models only)
|
|
- [ ] `poe` → `show status` (with a powered device attached)
|
|
- [ ] `aggregation` → `show`
|
|
- [ ] `lacp` → `show status`
|
|
- [ ] `stp` → `show status`
|
|
- [ ] `syslog` → `show log`
|
|
|
|
Configuration:
|
|
|
|
- [ ] `config-file` → `export` to a TFTP server once (the XML file itself)
|
|
- [ ] whether the web UI offers a configuration download, and how (URL, auth)
|