# Fixtures to capture Record raw output from a real device the first time one is connected. Store it under `tests/fixtures/-/` (e.g. `gs-2310p-plus-3.34/`), one file per command, plus a `COMMANDS.txt` that lists the command, the section it ran in, and the device state that matters (links up/down, PoE consumers, LLDP neighbours present or not). Scrub before committing: serial numbers, public IPs, SNMP communities, hostnames that identify a site. ## LCOS SX 3 (GS-23xx) Session basics: - [ ] login banner and the first prompt after SSH login - [ ] `?` at the top level (list of sections) - [ ] `?` inside each section listed below - [ ] the error text of an invalid command and of an invalid parameter Per section: - [ ] `system` → `show` - [ ] `firmware` → `show` - [ ] `port` → `show configuration` - [ ] `port` → `show status` (with at least one link up and one down) - [ ] `port` → `show simple-counter` - [ ] `port` → `show detail-counter 1` - [ ] `port` → `show sfp ` (with and without a module) - [ ] `ip` → `show` - [ ] `ipv6` → `show current` - [ ] `fdb` → `show mac-table` - [ ] `fdb` → `show static-mac` - [ ] `lldp` → `show config` - [ ] `lldp` → `show info ` (with a neighbour, e.g. another switch or a router) - [ ] `vlan` → `show vlan` - [ ] `vlan` → `show port-config` - [ ] `vlan` → `show port-status static` - [ ] `thermal` → `show` - [ ] `snmp` → `show snmp` - [ ] `snmp` → `show community` - [ ] `time` → `show ntp` - [ ] `poe` → `show config` (PoE models only) - [ ] `poe` → `show status` (with a powered device attached) - [ ] `aggregation` → `show` - [ ] `lacp` → `show status` - [ ] `stp` → `show status` - [ ] `syslog` → `show log` Configuration: - [ ] `config-file` → `export` to a TFTP server once (the XML file itself) - [ ] whether the web UI offers a configuration download, and how (URL, auth)