Files
deploy/README.md
T
Christian Manivong 4bf71b7e1c
CI / check (pull_request) Successful in 17s
feat: refuse a tag without an image for the host's platform
From 0.34.0 on, netOrk's releases (X.Y.Z, latest) are published for
linux/amd64 and linux/arm64, so a Raspberry Pi with a 64-bit OS can be a
target (NetOrk/netork#934). The deploy itself needed no change for that:
every step runs docker on the target host, which pulls its own platform,
and the images on the host (postgres, redis, apt-cacher-ng, signal-api)
exist for arm64 as well.

What did not work is a tag without arm64: latest-dev, main-<sha>,
feature-<branch> and every release before 0.34.0. On a Pi those failed at
the first pull with "no matching manifest for linux/arm64/v8", which names
neither the cause nor a tag that would work.

Now, right after the registry login, the host's architecture (docker
version) is compared with the platforms the registry lists for the
engine image, and on UI servers the ui image (docker manifest inspect).
A definite mismatch stops the deploy before anything on the host changes,
and says which tags carry arm64. When the registry's answer can't be read,
the pull decides, as before.
2026-10-11 08:38:39 +02:00

140 lines
6.2 KiB
Markdown

# netOrk deploy
Deploys [netOrk](https://git.netork.io/NetOrk/netork) to one or more Docker hosts in
parallel, from pre-built images in a container registry.
The machine running the deploy needs this repository, `ssh`, and a `deploy.env`. It does
not need a netOrk checkout. Each server pulls the images itself. The compose files come
out of the engine image for the tag being deployed, so they always match the images they
start, and database migrations run from that same image.
## Requirements
**On the machine running the deploy:**
- bash
- `ssh` with key-based access to every target
**On every target server:**
- at least 4 GB of RAM. On a test server with 74 devices, netOrk's containers took about
2.4 GB, and at least 0.9 GB stayed free. A large task needs that room. The breakdown
per container is in netOrk's `docs/TECHNICAL_DESIGN.md`, "Worker memory".
- Docker with the compose plugin
- a directory `~/netork/` with netOrk's `.env`, which holds the database and application
settings the compose file reads (`env_file: .env`)
**Images:** `netork/engine` and `netork/ui` must be published in the registry under the
tag you deploy. The engine image must carry its compose files under `/app/deploy/`.
Tags built before that change are refused with a clear message.
**Raspberry Pi and other arm64 hosts:** a Raspberry Pi 3, 4, 5 or Zero 2 W with a 64-bit
OS can be a target. Nothing changes in `deploy.env`: each host pulls the variant for its
own platform. netOrk publishes arm64 images for releases only, from 0.34.0 on (`latest`,
`X.Y.Z`). `latest-dev`, `main-<sha>`, `feature-<branch>` and older releases are amd64 only,
and a deploy of such a tag to an arm64 host is refused before the host is touched. The
images on the host (`postgres`, `redis`, `apt-cacher-ng`, `signal-api`) exist for arm64
as well.
## Setup
```bash
cp deploy.env.example deploy.env
$EDITOR deploy.env
```
`deploy.env` is gitignored. Point `DEPLOY_ENV_FILE` at another file to keep it
elsewhere.
| Variable | Meaning |
|---|---|
| `DEPLOY_SERVERS` | Space-separated default targets |
| `UI_SERVER` | Targets that also run `netork-ui` |
| `REGISTRY_HOST` | Registry to pull from; required |
| `NETORK_VERSION` | Tag to deploy (default `latest`) |
| `REGISTRY_USER`, `REGISTRY_PASSWORD` | Registry login used on every server |
| `REGISTRY_USER_<server>`, `REGISTRY_PASSWORD_<server>`, `NETORK_VERSION_<server>` | Per-server overrides. `<server>` has its dots replaced by underscores, e.g. `_10_0_0_2` |
| `DEPLOY_LOCK_WAIT` | Seconds to wait for another deploy to the same host (default 900) |
## Usage
```bash
./deploy.sh # every server in DEPLOY_SERVERS
./deploy.sh 10.0.0.1 # one server
./deploy.sh 10.0.0.1 10.0.0.2 # several, in parallel
./deploy.sh --version=main-1a2b3c4 10.0.0.1 # one-off tag, this run only
```
Only tags netOrk's CI publishes are accepted:
- `latest`
- `latest-dev`
- `main-<sha>`
- `feature-<branch>`
- `X.Y.Z`
Anything else is refused before any server is touched.
If you deploy a branch build, wait until its CI run has published the images. A deploy
started earlier pulls whatever image the registry held before, which is stale.
## What a deploy does, per server
0. Takes the host's deploy lock, `flock` on `~/netork/.deploy.lock`, and holds it until
the deploy ends. A second deploy to the same host waits for it and says who holds
it, since when, and which tag they are deploying. It gives up after 15 minutes
(`DEPLOY_LOCK_WAIT`, in seconds) without touching the host. The lock belongs to an
ssh session, so a deploy that fails, is interrupted or loses its connection frees it
on its own. A host without `flock` is deployed without the lock, with a warning.
1. Logs in to the registry. The password travels over ssh's stdin, never on a command
line. Then it checks that the tag has an image for the host's platform (`docker
version`, `docker manifest inspect`): engine, and on UI servers ui. If not, for
example `latest-dev` on a Raspberry Pi, it stops here and says which tags would work.
If the registry's answer can't be read, the pull below decides.
2. Pulls the engine image and copies `docker-compose.yml` and
`docker-compose.registry.yml` out of it into `~/netork/`.
3. Pulls the netOrk images, then force-recreates the API, the workers, `netork-beat`,
`flower` and, on UI servers, `netork-ui`. If the recreate fails, it is tried once
more after 5 s (`DEPLOY_RECREATE_RETRY_DELAY`). Compose's parallel recreate can lose
a container it just renamed and leave the rest stopped. If the second attempt fails
too, the container states are printed and the deploy fails.
4. Reconciles `apt-cacher-ng` and `signal-api`: each is recreated only if its
definition changed. It never touches `postgres` or `redis`.
It then removes services netOrk no longer ships, container and volume, where a host
still has them: today the bundled `registry` (NetOrk/netork#763). It reports only
what it actually removed; on a host that was cleaned earlier it says nothing.
5. Verifies that the containers run exactly the image that was pulled. If they don't, the
deploy fails.
6. Records `REGISTRY_HOST` and `NETORK_VERSION` in `~/netork/.env`, so that a
hand-typed `docker compose` on the host uses the same images.
7. Runs `alembic upgrade head` inside `netork-api`.
8. Prunes unused images.
A failing step stops that server's deploy with a non-zero exit, and the other servers
carry on. The script exits non-zero if any server failed and names those servers.
## Operating notes
- **Never delete these Docker volumes:**
- `celerybeat_schedule` holds the scheduler state.
- `signal_cli_data` holds netOrk's Signal device link. Losing it means pairing again
by QR code.
- `netork-beat` always rolls out together with the workers. The script does this for
you; keep it that way if you deploy by hand.
- Always deploy with this script. Do not point a local Docker client at a remote host
(`DOCKER_HOST=ssh://…`): it resolves volume paths locally and breaks the remote
containers.
## Development
```bash
pip install pytest ruff shellcheck-py
shellcheck deploy.sh
ruff format --check . && ruff check .
pytest
```
The tests are static and behavioural checks of `deploy.sh`. None of them reach a real
host.
## License
MIT, see [LICENSE](LICENSE).