4d86beea46 Update interface_counters from develop (#96)
* adding read_timeout_override netmiko option

* adding netmiko option session_log

* Bump black from 20.8b1 to 24.3.0

Bumps [black](https://github.com/psf/black) from 20.8b1 to 24.3.0.
- [Release notes](https://github.com/psf/black/releases)
- [Changelog](https://github.com/psf/black/blob/main/CHANGES.md)
- [Commits](https://github.com/psf/black/commits/24.3.0)

---
updated-dependencies:
- dependency-name: black
  dependency-type: direct:development
...

Signed-off-by: dependabot[bot] <support@github.com>

* remove demjson - blocking tests

* FIX minor formating fixes raised by pylama

* FIX limit napalm and netmiko o version 3.*, soften version requirements

* FIX minor formating fixes raised by pylama

* Allow testing on all supported Py versions

* FIX add platform name to driver s350

* FIX force interface speed as a float

* Update information about required versions to Py3.8+ and napalm 3

* Add scheduled check on develop branch

* Update pkg version in setup.py

* Update PublishToPIP.yml for manual run

* Napalm 4 compatibility, newer dependencies

* Full tox testing on "develop" and "master" branch.

* Remove Py13 - too early

* Do not test on PyPy, local test with local Py version only

* CI ThoroughTest for branches develop and master

* CI FastTest for all other branches.

* CI rename legacy jobs

* CI renaname job

* Updata docs

* Shorten name of publish workflow

* Check syntax for Py3.12

* use netmiko_args

* Add changes for 4.1.0 (#89)

* Update requirements.txt

* Typpo in requirements

* _send_command has only two parameters

* Adapt to stricter Unit tests

---------

Co-authored-by: Anton Gridnev <anton@gridnev.pro>

* Remove s350_base_interfaces custom map - it is allready in napalm base

* Adapt Unit tests to canonical_interface_name()

* Add format parameter to get_config()

* Add badges

* Tests for push are enought

* update CD actions

* add tests for device SG500-52

* Merge CI to develop (#95)

* Simplify CI

* CI update

* CI update

* Update CI from develop (#94)

* Add format parameter to get_config()

* Add badges

* Tests for push are enought

* update CD actions

* add tests for device SG500-52

---------

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: Dave <davama@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Anton Gridnev <anton@gridnev.pro>
2024-04-23 12:45:29 +02:00
2020-11-18 12:27:17 +01:00
2020-11-04 15:22:47 +00:00

Napalm-s350

NAPALM driver for Cisco SMB switches (SF3xx, SF5xx, SG3xx, SG5xx, CBS35x).

Status

Master: Thorough Test

Develop: Thorough Test

PyPi.org: Publish To PyPi.org

Requirements

Python 3.8+, napalm 4

Installation

pip3 install napalm_s350

CLI test

Default information (the same as call get_facts)

napalm --user USER --password PASSWORD --vendor s350 HOSTNAME

napalm --user USER --password PASSWORD --vendor s350 HOSTNAME --optional_args "force_no_enable=True"

Get interfaces

napalm --user USER --password PASSWORD --vendor s350 HOSTNAME call get_interfaces

Get configuration file

napalm --user USER --password PASSWORD --vendor s350 HOSTNAME call get_config

Debug

napalm --user USER --password PASSWORD --vendor s350 --debug HOSTNAME

Supported devices

This driver initially targets the Cisco SG350 device though other, similar, devices may be supported.

function SG300 SG500 SG350 SG550 stack SG500 stack SG550 CBS350
Send commands
cli x x x x x x x
Config manipulation
get_config x x x x x
get_config (filtered) x x x x x
get_config (sanitized) x x x x x
load_merge_candidate
load_replace_candidate
compare_config
commit_config
confirm_commit
has_pending_commit
rollback
discard_config
compliance_report
load_template
Get information
get_arp_table x x x x x
get_arp_table (with vrf) NS NS NS NS NS
get_bgp_config
get_bgp_neighbors
get_bgp_neighbors_detail
get_environment
get_facts x x x x x
get_firewall_policies
get_interfaces x x x x x
get_interfaces_counters
get_interfaces_ip x 4 x 4 x 4 x 4 x 4
get_ipv6_neighbors_table
get_lldp_neighbors x x x x x
get_lldp_neighbors_detail x x x x x
get_mac_address_table
get_network_instances
get_ntp_peers
get_ntp_servers x x x x x
get_ntp_stats
get_optics
get_probes_config
get_probes_results
get_route_to
get_snmp_information
get_users
get_vlans x x x x x
Other actions
is_alive
ping
traceroute

NS - not supported - devices do not have support for that feature 4 - IPv4 only ...

Want to add new device support?

To be sure we can support new device we use test files.

We need text output of those commands, to add new device:

show arp
show startup-config
show version
show system
show inventory
show hosts
show interface status
show running-config
show interfaces status
show interfaces description
show ports jumbo-frame
show ip int
show lldp neighbors
show sntp status

Those commands may need parameter change to suit your configuration:

show running-config full
show lldp local FastEthernet1
show lldp neighbors FastEthernet0/1

Please add each command to separate file - command show arp to file named show_arp.txt

Make pull request to /napalm-s350/tree/develop/test/unit/mocked_data/your device type/ or if you prefer make a Issue and add files as an atachement.

S
Description
NAPALM driver for Cisco SMB switches (fork of napalm-automation-community/napalm-s350)
Readme Apache-2.0
410 KiB
0 Stars 1 Watchers 0 Forks
Languages
Python 81.5%
Shell 18.5%