LANCOM's LCOS SX release page assigns SX 3.34 only to GS-2326P+, GS-2326+, GS-2310P+, GS-2310 and GS-2328F, and SX 4.30 to the XS/GS/IGS-3000 and GS-2400 series. The GS-2426 was listed under SX 3 from a misread lifecycle table. Move it, add GS-2412, GS-3252P and GS-3528XP to the SX 4 table, and record which series run SX 5. Refs NetOrk/netork#1094
4.6 KiB
LCOS SX 4 (GS-24xx, GS-3xxx)
Candidate first target alongside LCOS SX 3, because SX 4 is closer to the switches LANCOM sells today.
Devices
LANCOM's LCOS SX release page lists LCOS SX 4.30 for the XS/GS/IGS-3000 series and the GS-2400 series. SX 5 covers XS-6000, XS-5000, XS/GS-4500 (5.20) and the CS and YS series (5.30). Lifecycle data (checked 2026-10-13):
| Model | Firmware | End of sale | End of life | Successor |
|---|---|---|---|---|
| GS-3152X | LCOS SX 4.30 | 2023-08 | 2028-08 | GS-3628X |
| GS-3152XP | LCOS SX 4.30 | 2023-03 | 2028-03 | GS-3652XP |
| GS-3152XSP | LCOS SX 4.30 | 2023-08 | 2028-08 | GS-3652XUP |
| GS-3252P | LCOS SX 4.30 | 2023-03 | 2028-03 | R&S GS-3252P |
| GS-3528XP | LCOS SX 4.30 | 2025-04 | 2030-04 | GS-3628XP |
| GS-2412 | LCOS SX 4.30 | current |
The GS-2412 is a current product: 10 × 1 GbE, 2 × SFP, fanless, no PoE, layer 2+ only (no routing). The rows above were read through an automated summary of the lifecycle tables; verify a row on the source page before relying on it.
All three are past end of sale with no further major releases. The GS-3152X has 48 × 1 GbE, 4 × SFP+ (10 GbE) and "layer 3 lite" (static routing, DHCP server). Other GS-3xxx models and their SX versions: see the lifecycle tables.
Why SX 4 over SX 3
- Transport exists. netmiko ships
lancom_lcossx4(LancomLCOSSX4SSH, based onCiscoSSHConnection,logoutto exit,copy running-config startup-configto save). - Cisco-like CLI, like SX 5. Parsers written for SX 4 have a fair chance to carry over to the current SX 5 switches. SX 3's menu-sectioned CLI does not.
show running-configexists, soget_configdoes not need the TFTP export that SX 3 forces.- Layer 3 lite adds ARP, routes and DHCP server leases to what a driver can read.
Trade-offs: the GS-31xx/32xx models reach end of life in 2028, two years before SX 3; the GS-35xx and the current GS-24xx run longer. A 48-port switch is large for a desk; check fan noise and power draw before buying (not checked).
Documentation
LCOS SX 4.30 CLI Reference (LANCOM, 2024-05, 250 pages; a 4.20 edition exists too).
It lists every command with syntax, parameters and 207 examples with output. Examples are
from lab devices (e.g. MAC Address : 02-00-c1-…, uptime from 1970-01-01), so parsers
must still be tested on recorded output.
Commands accept output modifiers | begin|exclude|include <line>. Ports are addressed as
GigabitEthernet <port_type_list> (e.g. 1/1-48) and 10GigabitEthernet <port_type_list>
for the SFP+ ports.
Getter map
| Getter | Command |
|---|---|
get_facts |
show version (MAC, system name/contact/location, uptime, bootloader, active image) |
get_interfaces |
show interface * status, show interface * description, show interface * capabilities |
get_interfaces_counters |
show interface * statistics (optional bytes, discards, errors, packets, up/down filters) |
get_interfaces_ip |
show ip interface brief, show ipv6 interface brief, show interface vlan |
get_arp_table |
show ip arp |
get_route_to / routes |
show ip route |
get_mac_address_table |
show mac address-table (also … vlan, … interface, … count) |
get_lldp_neighbors, get_lldp_neighbors_detail |
show lldp neighbors |
get_vlans |
show vlan, show interface * switchport |
get_environment |
show process load (CPU), show thermal-protect, show green-ethernet fan, show system cpu status |
get_snmp_information |
show snmp, show snmp community |
get_ntp_servers, get_ntp_stats |
show ntp status |
get_users |
user accounts from show running-config; show users lists terminal sessions |
get_config |
show running-config (all-defaults for the full set); startup config to be checked |
| DHCP server (role method) | show ip dhcp server binding, show ip dhcp pool |
| PoE (role method) | show poe, show poe interface |
| Link aggregation | show aggregation, show lacp |
| Spanning tree | show spanning-tree |
| Logs | show logging |
| Transceivers | show interface * transceiver |
| Licenses | show licenses |
Open questions
- Numbering of the SFP+ ports on the GS-3152X (
10GigabitEthernet 1/1-4or continuing after the copper ports). - Whether
show running-configis complete enough to restore from, or whether the startup config differs in format. - How close SX 5 output is. The SX 5.20 reference is online, so this can be compared before buying an SX 5 device.
- Role base:
SwitchDriver. Layer 3 lite (DHCP server, static routes) may justify more mixins later, decided in napalm-device-types, not here.