# LCOS SX 4 (GS-24xx, GS-3xxx) Candidate first target alongside [LCOS SX 3](lcos-sx3.md), because SX 4 is closer to the switches LANCOM sells today. ## Devices LANCOM's LCOS SX release page lists **LCOS SX 4.30** for the XS/GS/IGS-3000 series and the GS-2400 series. SX 5 covers XS-6000, XS-5000, XS/GS-4500 (5.20) and the CS and YS series (5.30). Lifecycle data (checked 2026-10-13): | Model | Firmware | End of sale | End of life | Successor | |---|---|---|---|---| | GS-3152X | LCOS SX 4.30 | 2023-08 | 2028-08 | GS-3628X | | GS-3152XP | LCOS SX 4.30 | 2023-03 | 2028-03 | GS-3652XP | | GS-3152XSP | LCOS SX 4.30 | 2023-08 | 2028-08 | GS-3652XUP | | GS-3252P | LCOS SX 4.30 | 2023-03 | 2028-03 | R&S GS-3252P | | GS-3528XP | LCOS SX 4.30 | 2025-04 | 2030-04 | GS-3628XP | | GS-2412 | LCOS SX 4.30 | current | | | The GS-2412 is a current product: 10 × 1 GbE, 2 × SFP, fanless, no PoE, layer 2+ only (no routing). The rows above were read through an automated summary of the lifecycle tables; verify a row on the source page before relying on it. All three are past end of sale with no further major releases. The GS-3152X has 48 × 1 GbE, 4 × SFP+ (10 GbE) and "layer 3 lite" (static routing, DHCP server). Other GS-3xxx models and their SX versions: see the lifecycle tables. ## Why SX 4 over SX 3 - **Transport exists.** netmiko ships `lancom_lcossx4` (`LancomLCOSSX4SSH`, based on `CiscoSSHConnection`, `logout` to exit, `copy running-config startup-config` to save). - **Cisco-like CLI**, like SX 5. Parsers written for SX 4 have a fair chance to carry over to the current SX 5 switches. SX 3's menu-sectioned CLI does not. - **`show running-config` exists**, so `get_config` does not need the TFTP export that SX 3 forces. - **Layer 3 lite** adds ARP, routes and DHCP server leases to what a driver can read. Trade-offs: the GS-31xx/32xx models reach end of life in 2028, two years before SX 3; the GS-35xx and the current GS-24xx run longer. A 48-port switch is large for a desk; check fan noise and power draw before buying (not checked). ## Documentation **LCOS SX 4.30 CLI Reference** (LANCOM, 2024-05, 250 pages; a 4.20 edition exists too). It lists every command with syntax, parameters and 207 examples with output. Examples are from lab devices (e.g. `MAC Address : 02-00-c1-…`, uptime from 1970-01-01), so parsers must still be tested on recorded output. Commands accept output modifiers `| begin|exclude|include `. Ports are addressed as `GigabitEthernet ` (e.g. `1/1-48`) and `10GigabitEthernet ` for the SFP+ ports. ## Getter map | Getter | Command | |---|---| | `get_facts` | `show version` (MAC, system name/contact/location, uptime, bootloader, active image) | | `get_interfaces` | `show interface * status`, `show interface * description`, `show interface * capabilities` | | `get_interfaces_counters` | `show interface * statistics` (optional `bytes`, `discards`, `errors`, `packets`, `up`/`down` filters) | | `get_interfaces_ip` | `show ip interface brief`, `show ipv6 interface brief`, `show interface vlan` | | `get_arp_table` | `show ip arp` | | `get_route_to` / routes | `show ip route` | | `get_mac_address_table` | `show mac address-table` (also `… vlan`, `… interface`, `… count`) | | `get_lldp_neighbors`, `get_lldp_neighbors_detail` | `show lldp neighbors` | | `get_vlans` | `show vlan`, `show interface * switchport` | | `get_environment` | `show process load` (CPU), `show thermal-protect`, `show green-ethernet fan`, `show system cpu status` | | `get_snmp_information` | `show snmp`, `show snmp community` | | `get_ntp_servers`, `get_ntp_stats` | `show ntp status` | | `get_users` | user accounts from `show running-config`; `show users` lists terminal sessions | | `get_config` | `show running-config` (`all-defaults` for the full set); startup config to be checked | | DHCP server (role method) | `show ip dhcp server binding`, `show ip dhcp pool` | | PoE (role method) | `show poe`, `show poe interface` | | Link aggregation | `show aggregation`, `show lacp` | | Spanning tree | `show spanning-tree` | | Logs | `show logging` | | Transceivers | `show interface * transceiver` | | Licenses | `show licenses` | ## Open questions 1. Numbering of the SFP+ ports on the GS-3152X (`10GigabitEthernet 1/1-4` or continuing after the copper ports). 2. Whether `show running-config` is complete enough to restore from, or whether the startup config differs in format. 3. How close SX 5 output is. The SX 5.20 reference is online, so this can be compared before buying an SX 5 device. 4. Role base: `SwitchDriver`. Layer 3 lite (DHCP server, static routes) may justify more mixins later, decided in napalm-device-types, not here.