Files
napalm-tplink-jetstream/README.md
T
Christian Manivong dc41b8497e
driver / lint (pull_request) Successful in 13s
driver / standard (pull_request) Successful in 16s
driver / types (pull_request) Successful in 59s
driver / test (3.13) (pull_request) Successful in 52s
driver / test (3.12) (pull_request) Successful in 1m1s
driver / lowest (pull_request) Successful in 26s
driver / build (pull_request) Successful in 27s
driver / security (pull_request) Successful in 58s
CI / driver (pull_request) Successful in 2m6s
driver / publish (pull_request) Skipped
feat(time-sync): the switch's NTP servers and zone through TimeSyncMixin
netOrk aligns every device's NTP servers and time zone with its site's
(NetOrk/netork#2360, #2366). A JetStream keeps both in one line,
system-time ntp <zone> <primary> <backup> <hours>, with the zone as a
UTC offset from a fixed list and summer time in a system-time dst line
of its own.

get_time_sync() reads the servers from that line and the zone as None:
the switch keeps no name to map back. configure_time_sync() writes an
IANA zone as its offset and a dst recurring rule from the zone's POSIX
rule (posix_tz/parse_posix_tz), and refuses before sending anything
what the switch cannot take: more than two servers, anything but IPv4
addresses, an offset it does not offer, a change outside HH:MM of a day.
Servers and zone share the ntp line, so a call with both writes it once.
A change is saved to the startup configuration; values the switch
already has are not sent again, so the alignment on every poll does not
churn.

The code lives in time_sync.py; get_ntp_servers() now reads through it,
so the driver file shrinks (1999 -> 1987 lines).
2026-11-11 15:17:51 +01:00

2.0 KiB

napalm-tplink-jetstream

NAPALM community driver for TP-Link Jetstream managed switches (T1500G, T1600G, T2600G, T3700G and compatible series).

Tested devices

Model Series Tested
TL-SG2210P Jetstream Smart ✅
TL-SG3210 Jetstream Smart ✅

More devices from the T1500G, T1600G, T2600G and T3700G series should work as well — contributions welcome.

Requirements

Dependency Minimum version
Python 3.12
NAPALM 4.0
Netmiko 4.0

Installation

pip install napalm-tplink-jetstream

Or from source:

git clone https://git.netork.io/NAPALM/napalm-tplink-jetstream
cd napalm-tplink-jetstream
pip install -e .

Quick start

from napalm import get_network_driver

driver = get_network_driver("tplink_jetstream")
with driver("192.168.0.1", "admin", "admin") as device:
    facts = device.get_facts()
    print(facts)

Implemented getters

Getter Status
get_facts ✅
get_interfaces ✅
get_interfaces_ip ✅
get_config ✅
get_arp_table ✅
get_mac_address_table ✅
get_lldp_neighbors ✅
get_lldp_neighbors_detail ✅
get_vlans ✅
get_ntp_servers ✅
get_time_sync / configure_time_sync ✅ Up to 2 IPv4 servers; the zone as a UTC offset and a summer-time rule (read back as None)
cli ✅
is_alive ✅
get_bgp_neighbors ❌ Not applicable
load_replace_candidate ❌ Not applicable
commit_config ❌ Not applicable

Optional arguments

Argument Default Description
port 22 SSH port
force_no_enable False Skip enable after login
canonical_int_fmt False Use canonical interface names

Any additional keyword arguments are forwarded to Netmiko.

Development

pip install -e ".[dev]"
pytest tests/

License

Apache 2.0 — see LICENSE.