Files
napalm-tplink-jetstream/CHANGELOG.md
T
Christian Manivong 34f00f9f3a
driver / standard (pull_request) Successful in 16s
driver / lint (pull_request) Successful in 13s
driver / types (pull_request) Successful in 56s
driver / test (3.12) (pull_request) Successful in 57s
driver / test (3.13) (pull_request) Successful in 51s
driver / lowest (pull_request) Successful in 25s
driver / build (pull_request) Successful in 26s
driver / security (pull_request) Successful in 1m2s
CI / driver (pull_request) Successful in 2m28s
driver / publish (pull_request) Skipped
fix(snmp): report no community instead of inventing "public"
get_snmp_config started from community "public" and returned it with
running=True when no row of the community table parsed. Without a listed
community it now reports the agent as not running, as it already did for
"no community entry exists".

The issue's other two points were already fixed on main: the management
VLAN is matched exactly since c2f0f7c (_management_vlan, with the
caller's listen address), and the floor on napalm-device-types is 4.21.1
with no requirements.txt since 4e171bf.

Closes #3
2026-11-01 21:52:55 +01:00

3.8 KiB
Raw Blame History

Changelog

All notable changes to this driver. The format follows Keep a Changelog, versions follow Semantic Versioning.

[Unreleased]

Fixed

  • The SSH key exchange no longer uses diffie-hellman-group16-sha512. On an SG2210P with firmware 5.30 its 4096-bit exchange took 9 to 16 seconds, against netmiko's 10-second conn_timeout, so every other connection failed and the switch flapped between online and offline. diffie-hellman-group14-sha256 takes 1.5 seconds. A disabled_algorithms in optional_args still takes precedence.
  • ping() lists only replies in results. A "Request timed out" line was listed too, so a ping sweep reported hosts that never answered as alive.
  • get_snmp_config() no longer reports the community "public" when the switch lists none: without a listed community it reports the agent as not running.

Changed

  • Python 3.12 is the floor (requires-python = ">=3.12"): netOrk runs every driver on 3.12, so 3.10 and 3.11 are no longer tested (NAPALM/driver-standard#6).
  • The floor on napalm is 5.1: older releases import pkg_resources, which a Python 3.12 venv no longer has.

Fixed

  • get_arp_table() reports an unknown age as -1.0 (napalm-device-types' ARP_AGE_UNKNOWN) instead of 0.0, which means "confirmed just now": show arp has no age column (NetOrk/netork#1327).

[0.5.0] - 2026-10-23

The first release on PyPI through the shared workflow; 0.1.0 and 0.1.1 there are an old upload.

Changed

  • The driver follows the NAPALM driver standard (https://git.netork.io/NAPALM/driver-standard): CI on Gitea runs ruff, mypy, the tests on Python 3.10–3.13 and at the lowest declared versions, bandit, pip-audit and a build check, and a release tag publishes to PyPI. The package now ships py.typed and a LICENSE file. It requires Python 3.10 and napalm-device-types 4.21.1.
  • A failure to read the current VLANs before set_interface() moves a port to another access VLAN is now logged at debug level.

[0.4.0] - 2026-10-18

Changed

  • The SSH host key is verified: with a known key in optional_args["ssh_host_keys"] any other key is refused before login, and every key seen is reported to optional_args["ssh_host_key_observer"]. Without either argument the driver connects as before. Requires napalm-device-types 4.19.0.

[0.3.0] - 2026-10-17

Added

  • configure_snmp_agent(): the caller's community (read-only), the source interface set to the VLAN whose address is exactly the listen or management address, saved and checked in show snmp community.

Removed

  • Breaking: fix_snmp and run_device_action; fix_snmp set the community public and could pick the wrong VLAN.

[0.2.0] - 2026-10-16

Added

  • SNMP configuration (get_snmp_config()), PoE status and configuration (get_poe_status(), set_poe()), interface enable and description, LAG membership in get_interfaces(), and fingerprints for discovery.

Changed

  • The driver no longer collects over SNMP: SNMP_HEALTH_PROFILE declares where the switch publishes uptime, CPU and memory, and interface counters come from the 64-bit ifXTable.
  • get_config() drops the timestamped event-log lines the switch embeds in the running configuration.
  • set_interface() uses the switch's own commands for the access VLAN and the native VLAN of a trunk.
  • Requires Python 3.10 and paramiko 5.0.0 or newer (CVE-2026-44405).

[0.1.2] - 2026-05-29

Added

  • VLAN and interface configuration; TL-SG3210 support.

[0.1.1] - 2026-05-12

Fixed

  • VLAN membership is read correctly when the switch wraps it over several lines.

[0.1.0] - 2026-05-09

Added

  • tplink_jetstream driver for TP-Link Jetstream switches over SSH: facts, interfaces and their addresses, configuration, ARP and MAC tables, LLDP neighbours and VLANs.