* adding read_timeout_override netmiko option * adding netmiko option session_log * Bump black from 20.8b1 to 24.3.0 Bumps [black](https://github.com/psf/black) from 20.8b1 to 24.3.0. - [Release notes](https://github.com/psf/black/releases) - [Changelog](https://github.com/psf/black/blob/main/CHANGES.md) - [Commits](https://github.com/psf/black/commits/24.3.0) --- updated-dependencies: - dependency-name: black dependency-type: direct:development ... Signed-off-by: dependabot[bot] <support@github.com> * remove demjson - blocking tests * FIX minor formating fixes raised by pylama * FIX limit napalm and netmiko o version 3.*, soften version requirements * FIX minor formating fixes raised by pylama * Allow testing on all supported Py versions * FIX add platform name to driver s350 * FIX force interface speed as a float * Update information about required versions to Py3.8+ and napalm 3 * Add scheduled check on develop branch * Update pkg version in setup.py * Update PublishToPIP.yml for manual run * Napalm 4 compatibility, newer dependencies * Full tox testing on "develop" and "master" branch. * Remove Py13 - too early * Do not test on PyPy, local test with local Py version only * CI ThoroughTest for branches develop and master * CI FastTest for all other branches. * CI rename legacy jobs * CI renaname job * Updata docs * Shorten name of publish workflow * Check syntax for Py3.12 * use netmiko_args * Add changes for 4.1.0 (#89) * Update requirements.txt * Typpo in requirements * _send_command has only two parameters * Adapt to stricter Unit tests --------- Co-authored-by: Anton Gridnev <anton@gridnev.pro> * Remove s350_base_interfaces custom map - it is allready in napalm base * Adapt Unit tests to canonical_interface_name() * Add format parameter to get_config() * Add badges * Tests for push are enought * update CD actions * add tests for device SG500-52 * Merge CI to develop (#95) * Simplify CI * CI update * CI update * Update CI from develop (#94) * Add format parameter to get_config() * Add badges * Tests for push are enought * update CD actions * add tests for device SG500-52 --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Dave <davama@gmail.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Anton Gridnev <anton@gridnev.pro>
7.2 KiB
Napalm-s350
NAPALM driver for Cisco SMB switches (SF3xx, SF5xx, SG3xx, SG5xx, CBS35x).
Status
Requirements
Python 3.8+, napalm 4
Installation
pip3 install napalm_s350
CLI test
Default information (the same as call get_facts)
napalm --user USER --password PASSWORD --vendor s350 HOSTNAME
napalm --user USER --password PASSWORD --vendor s350 HOSTNAME --optional_args "force_no_enable=True"
Get interfaces
napalm --user USER --password PASSWORD --vendor s350 HOSTNAME call get_interfaces
Get configuration file
napalm --user USER --password PASSWORD --vendor s350 HOSTNAME call get_config
Debug
napalm --user USER --password PASSWORD --vendor s350 --debug HOSTNAME
Supported devices
This driver initially targets the Cisco SG350 device though other, similar, devices may be supported.
| function | SG300 | SG500 | SG350 | SG550 | stack SG500 | stack SG550 | CBS350 |
|---|---|---|---|---|---|---|---|
| Send commands | |||||||
| cli | x | x | x | x | x | x | x |
| Config manipulation | |||||||
| get_config | x | x | x | x | x | ||
| get_config (filtered) | x | x | x | x | x | ||
| get_config (sanitized) | x | x | x | x | x | ||
| load_merge_candidate | |||||||
| load_replace_candidate | |||||||
| compare_config | |||||||
| commit_config | |||||||
| confirm_commit | |||||||
| has_pending_commit | |||||||
| rollback | |||||||
| discard_config | |||||||
| compliance_report | |||||||
| load_template | |||||||
| Get information | |||||||
| get_arp_table | x | x | x | x | x | ||
| get_arp_table (with vrf) | NS | NS | NS | NS | NS | ||
| get_bgp_config | |||||||
| get_bgp_neighbors | |||||||
| get_bgp_neighbors_detail | |||||||
| get_environment | |||||||
| get_facts | x | x | x | x | x | ||
| get_firewall_policies | |||||||
| get_interfaces | x | x | x | x | x | ||
| get_interfaces_counters | |||||||
| get_interfaces_ip | x 4 | x 4 | x 4 | x 4 | x 4 | ||
| get_ipv6_neighbors_table | |||||||
| get_lldp_neighbors | x | x | x | x | x | ||
| get_lldp_neighbors_detail | x | x | x | x | x | ||
| get_mac_address_table | |||||||
| get_network_instances | |||||||
| get_ntp_peers | |||||||
| get_ntp_servers | x | x | x | x | x | ||
| get_ntp_stats | |||||||
| get_optics | |||||||
| get_probes_config | |||||||
| get_probes_results | |||||||
| get_route_to | |||||||
| get_snmp_information | |||||||
| get_users | |||||||
| get_vlans | x | x | x | x | x | ||
| Other actions | |||||||
| is_alive | |||||||
| ping | |||||||
| traceroute |
NS - not supported - devices do not have support for that feature 4 - IPv4 only ...
Want to add new device support?
To be sure we can support new device we use test files.
We need text output of those commands, to add new device:
show arp
show startup-config
show version
show system
show inventory
show hosts
show interface status
show running-config
show interfaces status
show interfaces description
show ports jumbo-frame
show ip int
show lldp neighbors
show sntp status
Those commands may need parameter change to suit your configuration:
show running-config full
show lldp local FastEthernet1
show lldp neighbors FastEthernet0/1
Please add each command to separate file - command show arp to file named show_arp.txt
Make pull request to /napalm-s350/tree/develop/test/unit/mocked_data/your device type/
or if you prefer make a Issue and add files as an atachement.