Add support and tests for SG250

This commit is contained in:
Petr Klima committed 2024-04-24 16:09:07 +02:00
1 parent b217d9f891
commit 7b731c0330
56 files changed
+2304 -51

No files matched your search

@@ -0,0 +1 @@
{"GigabitEthernet1": {"is_up": true, "is_enabled": true, "speed": 10.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet2": {"is_up": true, "is_enabled": true, "speed": 10.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet3": {"is_up": true, "is_enabled": true, "speed": 1000.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet4": {"is_up": true, "is_enabled": true, "speed": 100.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet5": {"is_up": true, "is_enabled": true, "speed": 100.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet6": {"is_up": true, "is_enabled": true, "speed": 100.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet7": {"is_up": true, "is_enabled": true, "speed": 10.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet8": {"is_up": true, "is_enabled": true, "speed": 100.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet9": {"is_up": false, "is_enabled": false, "speed": 0.0, "mtu": 9000, "last_flapped": -1.0, "description": "", "mac_address": "AA:AA:A0:22:2A:A2"}, "GigabitEthernet10": {"is_up": true, "is_enabled": true, "speed": 100.0, "mtu": 9000, "last_flapped": -1.0, "description": "Trunk to switchkuch-1", "mac_address": "AA:AA:A0:22:2A:A2"}}
@@ -0,0 +1,19 @@
Port Description
------- -----------
gi1
gi2
gi3
gi4
gi5
gi6
gi7
gi8
gi9
gi10 Trunk to switchkuch-1
Ch Description
------- -----------
Po1
Po2
Po3
Po4
@@ -0,0 +1,21 @@
Flow Link Back Mdix
Port Type Duplex Speed Neg ctrl State Pressure Mode
-------- ------------ ------ ----- -------- ---- ----------- -------- -------
gi1 1G-Copper Half 10 Enabled Off Up Disabled On
gi2 1G-Copper Half 10 Enabled Off Up Disabled On
gi3 1G-Copper Full 1000 Enabled Off Up Disabled Off
gi4 1G-Copper Full 100 Enabled Off Up Disabled On
gi5 1G-Copper Full 100 Enabled Off Up Disabled On
gi6 1G-Copper Full 100 Enabled Off Up Disabled On
gi7 1G-Copper Half 10 Enabled Off Up Disabled On
gi8 1G-Copper Full 100 Enabled Off Up Disabled Off
gi9 1G-Combo-C -- -- -- -- Down -- --
gi10 1G-Combo-C Full 100 Enabled Off Up Disabled Off
Flow Link
Ch Type Duplex Speed Neg control State
-------- ------- ------ ----- -------- ------- -----------
Po1 -- -- -- -- -- Not Present
Po2 -- -- -- -- -- Not Present
Po3 -- -- -- -- -- Not Present
Po4 -- -- -- -- -- Not Present
@@ -0,0 +1,28 @@
Device ID: aa:aa:a0:22:2a:a2
Port ID: gi10
Capabilities: Bridge, Router
System Name: switch-no-2548-1
Management address: 30.70.0.37
Management address: fe80::c644:a0ff:fe3b:17d2%vlan1
802.3 Power Via Mdi:
MDI Power support Port Class: PSE
PSE MDI Power Support: Not supported
PSE MDI Power State: Not enabled
PSE power pair control ability: Not supported
PSE Power Pair: Signal
PSE Power class: 1
Power Type: Type 2 PD
Power Source: Unknown Power Source
Power Priority: unknown
PSE Allocated Power Value: 0.0
4-Pair POE supported: No
Spare Pair Detection/Classification required: No
PD Spare Pair Desired State: Disabled
802.1 PVID: 1
802.1 PPVID:
802.1 VLAN:
802.1 Protocol:
@@ -0,0 +1,2 @@
Jumbo frames are enabled
Jumbo frames will be enabled after reset