driver / standard (pull_request) Successful in 24s
driver / lint (pull_request) Successful in 24s
driver / types (pull_request) Successful in 1m28s
driver / test (3.13) (pull_request) Successful in 1m12s
driver / test (3.12) (pull_request) Successful in 1m21s
driver / lowest (pull_request) Successful in 29s
driver / build (pull_request) Successful in 30s
driver / security (pull_request) Successful in 1m0s
CI / driver (pull_request) Successful in 2m38s
driver / publish (pull_request) Skipped
push_mac_acl and push_radio_channel sent each step through the interactive shell and never looked at the result: a refused uci set, add_list, commit or wifi reload passed silently, an SSID no wifi-iface carried did nothing, and wifi was restarted after a refused channel. Each step now runs on an SSH exec channel of its own, as root, with its exit status checked (uci_steps.UciStepsMixin). A refused step raises CommandErrorException naming the command and what the router said; a refusal before the commit reverts what was staged, so a later commit does not apply half of it, and wifi is not restarted. push_mac_acl reads the sections once, raises when none carries the SSID, and deletes macfilter/maclist only where a section has them instead of hiding each delete's status behind `|| true`. Closes #35
9.0 KiB
9.0 KiB
Changelog
All notable changes to napalm-openwrt. The format follows Keep a Changelog, versions follow Semantic Versioning. Versions up to 0.6.0 were not recorded here; their history is the git log.
[Unreleased]
Changed
- Needs napalm-device-types 4.36.0 or later (
TimeSyncDict.dhcp_ntp_servers). - A time sync write no longer sets
use_dhcp=0, as the first time sync commit (#36) did; a router that commit wrote keepsuse_dhcp=0until it is set back.
Added
- Time sync (napalm-device-types
TimeSyncMixin, NetOrk/netork#2364):get_time_sync()reads the router's NTP servers and its zone fromuci -q show system;configure_time_sync()writes both. The servers replacesystem.ntp.serverand enable the client;sysntpdrestarts.use_dhcpstays as the router has it: the servers of a DHCP lease (option 42) count (NetOrk/netork#2380).dhcp_ntp_serversnames them -- what sysntpd adds whileuse_dhcpis on, each interface'sdata.ntpserverinubus call network.interface dump(only thedhcp_interfacelist's where it names any), read in the same round trip; None where netifd gives no answer. The zone is written as its name (zonename, in LuCI's spelling) and its POSIX rule (timezone, from napalm-device-types'posix_tz), then/etc/init.d/system reloadand a restart of logd apply it -- the rule, not the name, is what libc reads (NetOrk/netork#1849). A value the router already has is not written again and nothing restarts. The zone reads by its name only where the rule in force is that zone's: a router whose rule differs from itszonename, or that has a rule only, reads as the one zone with that rule, or as no zone where several share it.synchronizedis None: BusyBox ntpd keeps no state to read. get_host_status()(napalm-device-typesHostStatusMixin), over an SSH exec channel: whether the router needs a reboot, how full its filesystems are, and -- with napalm-device-types 4.32 or newer -- whether apk (OpenWrt 25.12) or opkg (before) was left halfway, and which of the two it read (NetOrk/netork#851).- Scheduled jobs (NetOrk/netork#1933, #32), through napalm-device-types'
PosixScheduledJobsMixin:get_scheduled_jobs()reads every crontab in/etc/crontabs-- BusyBox crond has no/etc/crontab,cron.d, run-parts, anacron or systemd -- with the time zone from UCI and each crontab's package fromopkg;manage_scheduled_job()enables, disables or runs one now;put_scheduled_job()anddelete_scheduled_job()write and remove an application's own job as marked lines in the user's crontab. Every write changes only the job's own line, is read back (BusyBoxcrontabexits 0 when it could not write) and leaves cron enabled and restarted. A run is the command as BusyBox crond runs it (%is no stdin), bounded bytimeoutwhere the router has it (OpenWrt 25.x); another user's job runs throughstart-stop-daemon -c, as OpenWrt's BusyBox has nosu.@dailyand the other aliases are written as five fields;@rebootis refused, as OpenWrt's crond has no special times. configure_lldp_agent(interfaces)(napalm-device-typesLldpAgentMixin): installs lldpd where it is missing, writes the interfaces given as lldpd's interface list in UCI, enables lldpd at boot and restarts it. A VLAN device (br-ap.10) is written as the device under it (br-ap). It is the action for the setup the LLDP getters used to do on every poll (#8). Needs napalm-device-types withLldpAgentMixin.
Changed
get_ntp_servers()andget_ntp_peers()read over an SSH exec channel, with the same reading asget_time_sync(), and name no servers while the NTP client is disabled (system.ntp.enabled='0'): sysntpd then starts no ntpd.- The floor on napalm-device-types is 4.35.0, the first release with
TimeSyncMixin(it was 4.26.0 forPosixScheduledJobsMixin, and 4.24.0 for the sharedlldpctlparser before that). - Python 3.12 is the floor (
requires-python = ">=3.12"): netOrk runs every driver on 3.12, so 3.10 and 3.11 are no longer tested (NAPALM/driver-standard#6). - The floor on napalm is 5.1: older releases import
pkg_resources, which a Python 3.12 venv no longer has. get_lldp_neighbors()andget_lldp_neighbors_detail()only read. They no longer enable and start a stopped lldpd, and no longer rewrite lldpd's interface list and restart it, which could happen on every poll. A device whose lldpd is stopped now reports no neighbours until lldpd is started, for example withmanage_service("lldpd", "enable")andmanage_service("lldpd", "start")(#8).
Fixed
push_mac_acl()andpush_radio_channel()raise when the router refuses a step (CommandErrorException, naming theucicommand or the wifi restart and what the router said). They used to return normally after a refuseduci set,add_list,commitorwifi reload, so an ACL that never landed looked applied. Each step runs on an SSH exec channel of its own and as root, with its exit status checked; a refused change reverts what was staged, so nothing of it is committed by a later write, and wifi is not restarted for it.push_mac_acl()raises when no wifi-iface carries the SSID, where it did nothing, and deletesmacfilter/maclistonly where a section has them instead of hiding every delete's status behind|| true(#35).get_ntp_servers()names every server of thesystem.ntp.serverlist; it kept only the first, as uci prints a list as'a' 'b' 'c'on one line.get_lldp_neighbors()andget_lldp_neighbors_detail()keep an interface name with a dot whole: the neighbours of a VLAN interface such aseth0.1used to come back undereth0with every field empty (#26). A neighbour that names its port by MAC address or a local id is reported with that port instead of an empty one, and a chassis named by a local id or an address with that id. The detail now also carries the neighbour's system description and capabilities, which were always empty. lldpd's output is parsed by napalm-device-types' shared parser.get_lldp_neighbors()reports a neighbour's chassis MAC asmac(lower case) when the neighbour names its chassis by one, as napalm-linux does, so netOrk can match the neighbour by MAC rather than by name only (#31).get_lldp_neighbors()andget_lldp_neighbors_detail()raise when lldpctl fails (not installed, lldpd not running or unreachable), with lldpctl's message; they used to return no neighbours, the same answer as a device without any (#27). An empty result now means lldpctl ran and listed none.get_environment()raises when/proc/stator/proc/meminfocannot be read or parsed, instead of reporting 0 % CPU and 0 bytes of memory.get_arp_table()reports an unknown age as-1.0(napalm-device-types'ARP_AGE_UNKNOWN) instead of0.0, which means "confirmed just now": neitherip neighnor/proc/net/arphas an age (NetOrk/netork#1327).- The driver no longer removes
portfrom theoptional_argsdict it is given: the caller's dict stays as it was (#19). manage_service()reports a failed action or a missing init script as failed: only the init script's exit status decides, where any action used to come back as a success (#3).apply_updates()reports a failed upgrade as failed, with the package manager's exit status inerror; it used to report every upgrade as done (#11).get_environment()reports the CPU usage of the last second, from two reads of/proc/statone second apart; it used to report the average since boot, so a box busy for the last minute could show a low figure (#10).get_lldp_neighbors()andget_lldp_neighbors_detail()report every neighbour on a port (a phone with a PC behind it, a switch without LLDP of its own); only the last one came back, mixed with fields of the others (#9).install_package()anduninstall_package()report a failed install or removal as failed: only the package manager's exit status decides. They used to search the output for words like "error:", so an opkg dependency failure ("Collected errors:", "Cannot install package …") came back as a success, and a successful install of a package whose name contains "failed" as a failure (#28).
[0.7.0] - 2026-10-23
The first release on PyPI.
Changed
- The driver follows the NAPALM driver standard
(https://git.netork.io/NAPALM/driver-standard): CI on Gitea runs ruff, mypy, the
tests on Python 3.10–3.13 and at the lowest declared versions, bandit, pip-audit and
a build check, and a release tag publishes to PyPI. The package now ships
py.typedand a LICENSE file. Python 3.8 and 3.9 are no longer supported; napalm-device-types never ran on them. - napalm-device-types 4.21.1 or newer is required.
- Exceptions the driver deliberately ignores (the snmpd community in
get_snmp_config(), the network VLANs inget_ssids()) are now logged at debug level. - The project links point at git.netork.io instead of GitHub.