# Changelog

All notable changes to this project will be documented in this file.

The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).

## [Unreleased]

### Added
- apt's proxy through napalm-device-types' `AptProxyMixin` (NetOrk/netork#1397). `get_package_proxy()` is what `apt-config dump` says, not `00proxy` alone: a proxy in `90curtin-aptproxy` or `/etc/apt/apt.conf` wins over it, and was missed. New: `get_package_proxy_report()` (every line that sets it, per-host overrides, the https sources) and `check_package_proxy(url, expect)` (a fetch with `apt-helper`, past any proxy). `configure_package_proxy(url)` now also comments out other proxy lines, reads the result back and fetches one `InRelease` through the proxy; it fails when apt still fetches elsewhere. Reads run on the exec channel. Requires napalm-device-types 4.22.0; version 0.14.0.
- `get_host_firewall()` (napalm-device-types' `HostFirewallMixin`, NetOrk/netork#1344): the host's own netfilter rules — `nft -j list ruleset`, with the tables iptables manages taken from `iptables-save` — as chains and rules in one shape. Read-only, as root, on an exec channel (the nft JSON is one long line). Requires napalm-device-types 4.21.0; version 0.13.0.
- `get_service_packages()` (napalm-device-types' `ServicePackagesMixin`, NetOrk/netork#1236): which installed packages each systemd service is made of — the one shipping its unit file and the one shipping its `ExecStart` binary. Read-only, on an exec channel under `sh`, without sudo. Requires napalm-device-types 4.20.0; version 0.12.0.

### Security
- The SSH host key is verified (NetOrk/netork#1167). `open()` hands netmiko the key the caller expects for the port in `optional_args["ssh_host_keys"]` (as a `known_hosts` file that exists only while it connects, with `ssh_strict`), so any other key is refused before the login (`SshHostKeyMismatch`); without one netmiko accepts the first key. Every key seen goes to `optional_args["ssh_host_key_observer"]`. OpenMediaVault and QNAP get this through `LinuxDriver.open()`. Requires napalm-device-types 4.19.0; version 0.11.0.

### Changed
- **Breaking:** `get_device_warnings` is gone, and with it the `apt_proxy_url` argument.
  The driver reports facts and the application names warnings (napalm-device-types 4.14):
  `get_package_proxy()` says which proxy apt fetches through; pending updates were always
  in `get_available_updates()`. Requires napalm-device-types 4.14.0; version 0.9.0.

### Changed

- **Breaking:** `run_device_action` is gone, with `fix_snmp`, `fix_apt_proxy`,
  `fix_docker_permissions` and the unused `apt_update_upgrade`. The driver implements
  napalm-device-types 4.13's fix templates instead, and the caller supplies every value:
  `configure_snmp_agent(settings)` (one `rocommunity` line per allowed source, udp/161
  opened in ufw or iptables for those sources only, each step judged by its exit
  status), `configure_package_proxy(url)`, `grant_container_engine_access(user)` and
  `ensure_package(name)`. No community, contact, location or address of an application
  is built in any more. Requires napalm-device-types 4.13.0 or later; version 0.8.0.
- The sudo hint names no application's settings.

### Fixed

- The type annotations resolve: `Dict`, `List` and `Optional` were used without an
  import (#29).

### Added

- `get_system_identity()` (napalm-device-types 4.9 `SystemIdentityMixin`): the host's
  SMBIOS system UUID, product serial and board serial, read as root on an exec channel,
  vendor placeholders empty. netOrk matches a server to its BMC on these. Requires
  napalm-device-types 4.9.0 or later; version 0.7.0.

### Changed

- Requires napalm-device-types 4.7.1 or later; version 0.6.0.
- **Breaking:** `get_users()` is now `get_os_users()`, following napalm-device-types
  4.7, which renamed `OSDriver.get_users` because NAPALM's own `get_users` has
  another shape. The return value is unchanged (a list of `UserDict`).
  `get_users()` is NAPALM's again and raises `NotImplementedError`.

### Fixed

- Listing updates on yum hosts (RHEL 7, CentOS 7) no longer fails with
  napalm-device-types 4.7: its `parse_dnf_security` needs the `__DNF_RC=<status>`
  line `DNF_SECURITY_COMMAND` prints, and the yum security query had none, so it
  raised `ValueError`. The yum query now prints that marker the same way
  (`{ ...; echo __DNF_RC=$?; } | cat`). A yum or dnf security query that failed,
  or whose output was cut short before the marker, still leaves `security` unknown
  (`None`) instead of reporting no advisories.

### Security

- `run_command(privileged=True, stdin=...)` raises `ValueError` while a sudo
  password is set. `sudo -S` reads the password from stdin, and a sudo that does
  not prompt (NOPASSWD, a cached timestamp) left it for the command, which read
  it as the first line of the data: netOrk wrote it into a file that way
  (NetOrk/netork#1029). Stage the data without privilege and have root install
  that file. Without a sudo password (`sudo -n`) or for a root login, stdin
  still goes to the command.
- The sudo password is no longer typed into the interactive shell
  (NetOrk/netork#1039). Every privileged command ran there as
  `echo '<password>' | sudo -S -p "" <command>`: bash kept it in its history,
  so each poll wrote the password into the login user's `~/.bash_history`, and
  while the command ran it was in the process list for every local user.
  Privileged commands (`_sudo`, `_sudo_status`, and `_run_privileged` with a
  sudo password) now run on an exec channel like `run_command(privileged=True)`:
  the password reaches `sudo -S` on stdin, there is no PTY to echo it, and the
  whole command runs as root in one `sh -c` (before, only the part up to the
  first `;`, `&&` or `|` did, so `mv … && chown root:root …` failed its chown).
  The interactive session also switches its history off before its first
  command (` unset HISTFILE; set +o history`). **History files written before
  this version may still hold the sudo password**: remove those lines from the
  login user's `~/.bash_history` on your hosts and consider changing the
  password. `_sudo_status` takes the exit status from the channel; it is `None`
  only when the channel closed without one.
- The snmpd and apt proxy fixes no longer stage their files at a fixed path in
  /tmp (`/tmp/netork_snmpd.conf`, `/tmp/netork_00proxy`) and then `mv`,
  `chown` and `chmod` them as root. Another local user could create that path
  first as a symlink, for example to `/etc/shadow`, and root's `chown`/`chmod`
  followed it. The content now goes to a fresh `mktemp` file under `umask 077`,
  written without privilege, and root `install`s it as a new file owned by root
  (mode 644) next to the target and renames it into place
  (`_install_file_as_root`). Nothing runs as root when staging failed.
- `get_vpn_tunnels()` without a sudo password no longer writes `wg show all dump`
  (which includes the interfaces' private keys) to the predictable
  `/tmp/.netork_wg_<hash>`; the dump comes straight from the exec channel.

## [0.4.0] – 2026-10-08

### Added

- `get_virtual_ips()` through napalm-device-types' `VirtualIpsMixin` (4.2.0): the
  addresses vip-manager and keepalived configuration lets float onto this host,
  whether or not it holds them right now (NetOrk/netork#829). The command goes on
  the exec channel (`run_command`): with its awk filter it is about 4 kB, past the
  line the PTY reliably takes. Root first, then without it.

## [0.3.0] – 2026-10-08

### Removed

- `get_docker_info()`, `get_docker_outdated()`, `reconstruct_docker_run()` and
  the `_docker_bin()` hook, with the image-ID helpers they used. netOrk reads
  and handles containers itself over the Engine API, through
  `open_container_engine()` (NetOrk/netork#765), and no longer calls them.
  `run_device_action("fix_docker_permissions")` stays: letting the login user
  use Docker is an OS action.

## [0.2.0] – 2026-10-07

### Added

- `run_command()` and `open_stream()`, the public command channel from
  napalm-device-types 2.6.0: an exec channel on the existing SSH transport, so
  no PTY, separate stderr and a real exit code. `privileged=True` runs as root
  directly, through `sudo -S` with the password on stdin (never on the command
  line), or through `sudo -n`, which fails instead of prompting.
- `ContainerEngineMixin`: `container_engines()` and `open_container_engine()`,
  whose `open_api()` streams the Docker Engine API over `docker system
  dial-stdio` (NetOrk/netork#765). The existing Docker methods are unchanged.

### Changed

- Requires napalm-device-types >= 2.6.0.

## [0.1.0] – 2026-05-29

### Added

- Initial release
- `LinuxDriver` inheriting from `napalm_device_types.OSDriver`
- SSH transport via Netmiko `linux` device type
- Auto-detection of package manager: `apt`, `dnf`, `yum`, `apk`, `pacman`
- Standard NAPALM methods: `get_facts()`, `get_interfaces()`, `get_interfaces_ip()`,
  `get_arp_table()`, `get_config()`, `ping()`
- OS-specific methods: `get_packages()`, `get_pending_updates()`, `apply_updates()`,
  `get_services()`, `get_users()`, `get_processes()`, `get_cron_jobs()`
- `apply_updates()` validates all package names against `^[a-zA-Z0-9_\-\+\.]+$`
  to prevent shell injection before passing them to the package manager
- SysV fallback for `get_services()` on non-systemd systems
- Unit tests with mocked SSH connections

[Unreleased]: https://github.com/chrismanivong/napalm-linux/compare/v0.1.0...HEAD
[0.1.0]: https://github.com/chrismanivong/napalm-linux/releases/tag/v0.1.0