Files
napalm-lancom/docs/fixtures.md
T
Christian Manivong 4c4805bae3 docs: add LCOS SX 4 (GS-3152X) as first-target candidate
The GS-3152X runs LCOS SX 4.30 (end of life 2028-08). netmiko already has
a transport for it, show running-config exists (SX 3 can only export its
config to TFTP), and its Cisco-like CLI is closer to the current SX 5
switches. docs/lcos-sx4.md maps the getters to commands from the SX 4.30
CLI reference; fixtures.md gets the matching capture list.

Refs NetOrk/netork#1094
2026-10-13 00:35:11 +02:00

3.1 KiB

Fixtures to capture

Record raw output from a real device the first time one is connected. Store it under tests/fixtures/<model>-<firmware>/ (e.g. gs-2310p-plus-3.34/), one file per command, plus a COMMANDS.txt that lists the command, the section it ran in, and the device state that matters (links up/down, PoE consumers, LLDP neighbours present or not).

Scrub before committing: serial numbers, public IPs, SNMP communities, hostnames that identify a site.

LCOS SX 3 (GS-23xx)

Session basics:

  • login banner and the first prompt after SSH login
  • ? at the top level (list of sections)
  • ? inside each section listed below
  • the error text of an invalid command and of an invalid parameter

Per section:

  • system → show
  • firmware → show
  • port → show configuration
  • port → show status (with at least one link up and one down)
  • port → show simple-counter
  • port → show detail-counter 1
  • port → show sfp <sfp-port> (with and without a module)
  • ip → show
  • ipv6 → show current
  • fdb → show mac-table
  • fdb → show static-mac
  • lldp → show config
  • lldp → show info <port-list> (with a neighbour, e.g. another switch or a router)
  • vlan → show vlan
  • vlan → show port-config
  • vlan → show port-status static
  • thermal → show
  • snmp → show snmp
  • snmp → show community
  • time → show ntp
  • poe → show config (PoE models only)
  • poe → show status (with a powered device attached)
  • aggregation → show
  • lacp → show status
  • stp → show status
  • syslog → show log

Configuration:

  • config-file → export to a TFTP server once (the XML file itself)
  • whether the web UI offers a configuration download, and how (URL, auth)

LCOS SX 4 (GS-3xxx)

Session basics:

  • login banner and the first prompt after SSH login
  • show ? (list of show commands on this firmware)
  • the error text of an invalid command

Commands:

  • show version
  • show system cpu status
  • show interface * status
  • show interface * description
  • show interface * capabilities
  • show interface * statistics
  • show interface * switchport
  • show interface * transceiver (with and without an SFP+ module)
  • show interface vlan
  • show ip interface brief
  • show ipv6 interface brief
  • show ip arp
  • show ip route
  • show mac address-table
  • show lldp neighbors (with a neighbour)
  • show vlan
  • show process load
  • show thermal-protect
  • show green-ethernet fan
  • show snmp
  • show snmp community
  • show ntp status
  • show users
  • show ip dhcp server binding, show ip dhcp pool (if the DHCP server is used)
  • show poe, show poe interface (PoE models only)
  • show aggregation, show lacp
  • show spanning-tree
  • show logging
  • show licenses
  • show running-config
  • show running-config all-defaults