# First test devices: Lenovo ThinkCentre M910x Two ThinkCentre M910x (Tiny, Intel Q270, vPro) with Intel ME/AMT 11.x, plus possibly a third to experiment on. Nothing has been recorded from them yet; the driver is tested against Intel's AMT 12 recordings (see [testing.md](testing.md)). ## Setting up AMT Menu names vary between BIOS and ME firmware versions. 1. **BIOS** (F1): under *Advanced → Intel Manageability*, enable Intel Manageability Control and the Ctrl+P prompt for MEBx. 2. **MEBx** (Ctrl+P at boot): log in with the default password `admin` and set a new one (8 to 32 characters with upper and lower case, a digit and a special character). 3. *Intel AMT Configuration → Manageability Feature Selection*: enabled. 4. *Network Setup → TCP/IP Settings → Wired LAN IPv4*: **turn DHCP off** and give AMT a **static address of its own**, with mask, gateway and DNS. In DHCP mode AMT uses the operating system's address, and netOrk keeps one device per address. 5. *Network Access State*: activate network access. 6. *User Consent*: for KVM without a code from the person at the machine, set opt-in to none. Admin Control Mode, which manual MEBx setup gives, allows that. 7. *Redirection Features*: SOL, storage redirection (IDE-R) and KVM as wanted. Afterwards `http://:16992/` answers with AMT's web UI, and the `Server` header names the version. ## Recording From a machine that reaches AMT, with the password in a file: ```bash python -m napalm_amt.record --user admin --password-file ~/.amt-m910x \ --out tests/fixtures/lenovo-m910x- ``` The recorder only reads (see [testing.md](testing.md)). It redacts the provisioning OTP and the RFB password and keeps serial numbers. ## What the recordings have to settle These are assumptions the driver makes from Intel's AMT 12 recordings and documentation: - [ ] **System UUID byte order.** `get_hardware_inventory()["system_uuid"]` should equal `dmidecode -s system-uuid` on the machine's OS. netOrk links AMT to its host by it. - [ ] **Chassis versus board.** Whether `CIM_Chassis.Model` holds Lenovo's machine type (`10MU…`) and `CIM_Card` the board. - [ ] **Event log timestamps.** Taken as UTC. Some AMT versions keep local time. - [ ] **Drives.** Whether AMT 11 lists `CIM_MediaAccessDevice` at all. - [ ] **Graceful power states.** Whether AMT lists 12 and 14 with the OS running, and whether that needs the Intel ME driver (LMS) on the host. - [ ] **Sleep.** A sleeping machine is reported as Off. Check that On wakes it. - [ ] **Static address.** `AMT_EthernetPortSettings.IPAddress` present with a static configuration. - [ ] **AMT version and CVE state.** Which 11.8 build Lenovo's latest ME firmware gives.